Thread: Fastest 16g turbo Goes 11.46@126mph

i want this guys same set up sal! what do you think ? i can't belive a 16g turbo with 280 cams going that fast but i guess it does!

click on his parts page!
1G Fastest 16g in Canada Goes 11.46@126mph - DSM Forums
quote (I still can't get over the 127 MPH traps, at 28psi, on the standard wastegate actuator. I can only guess that those 280's really help. It seems that even though those cams are designed for larger turbos and higher powerbands, they and other cams like 272 can still draw performance at higher RPM on the small turbos, whose "powerbands" are much lower in the rev range.

The car is not only quick, it's just plain fast.)







16g Talon Goes 11.46@126MPH - Car Videos on StreetFire
[YOUTUBE]3a6ywSXY8tE[/YOUTUBE]

I can't remember what trim is your turbo Joe but if it's a 50 trim I would go with 272's if it's a 60 trim I would go with the 280's Hks,Kelford or Delta's. Deltas have the same specs as HKS. I have heard bad results on BC Cam's. Get BC valvetrain,ARP rod bolts,Cometic head gasket and ARP Head bolts and have youre ECU eprom for tuning and I don't see why you can't hit the 11"s pal.

Originally Posted by 1G4G63

I can't remember what trim is your turbo Joe but if it's a 50 trim I would go with 272's if it's a 60 trim I would go with the 280's Hks,Kelford or Delta's. Deltas have the same specs as HKS. I have heard bad results on BC Cam's. Get BC valvetrain,ARP rod bolts,Cometic head gasket and ARP Head bolts and have youre ECU eprom for tuning and I don't see why you can't hit the 11"s pal.

it's a bullseye turbo. i was looking at rods today and found WyldKardz DSM Build from SAC and found he is using Groden aluminum rods topped off with Mahle pistons . i did not know Groden aluminum rods made stuff for 4g63
WyldKardz DSM Build Past/Present - DSM Forums: Mitsubishi Eclipse, Plymouth Laser, and Eagle Talon Forum: DSMtalk.com


[YOUTUBE]pe9DKvrfuqE[/YOUTUBE]
[YOUTUBE]IvU1Gl3ydrY[/YOUTUBE]

damn those vids are sick! damn DSM's!

They do make them but I wouldn't run them on a street car, I see them more on track cars applicattions. they have to be retorqued often since they are made of alluminum. I would stick with Manley or Eagle.

I don't have much experience with DSMs, but an Evo with bolt ons, proper fuel, cams and a tune on race gas will do mid 11's.

At that power level, just head studs and rod bolts should be all that is needed.

You guys can check www.evoempire.org for more up to date 4G63 tech.

Those were some sick videos. I will say that those were 2 TERRIBLE examples of FI LS1 cars. Any FI LS1 car should easily be in the 10s, and that 300zx was putting busses on the with a 16g turbo????? Just doesn't add up unless the Z is a 9 second car or something.

The title states"fastest dsm" is that true? The fastest dsm runs low 11's.

Fastest 16G TURBO!!!! Not the fastest DSM in general. Thats what he is refering to.

whats a 16g?

lol dude im clueless bear with me.