Thread: Something's not Right!!

somethings up with either my vacuum or mechanical advance.
Ive messsed with everything, I put both light and heavy springs in the mechanical advance and I've adjusted the vacuum advance up and down,
and still when I put a load on the throttle it struggles to get any RPM.

Any help would be great!!!

Make sure vacume line is hooked to port above throttle plate.
many put the hose on plate where it draw vac from manifold
id have to see a q jet but holley put it on metering block.
start from scratch and make sure initial is where it needs to be.

he has a edlebroke!

Originally Posted by CREW CAB CHEVELLE

somethings up with either my vacuum or mechanical advance.
Ive messsed with everything, I put both light and heavy springs in the mechanical advance and I've adjusted the vacuum advance up and down,
and still when I put a load on the throttle it struggles to get any RPM.

Any help would be great!!!

It's called have a little 350 in a bigass chevelle :P j/k is it killing the motor? Or just not pulling the way it should??