+ Reply to Thread
Results 1 to 10 of 17
Thread: New to me Camaro
LinkBack URL
About LinkBacks-
12-06-2011 #1
Private Racer
- Join Date
- Dec 2009
- Posts
- 37
New to me Camaro
Been lurking for awhile; just bought this car. Had Nate@All Out tune up the car due to some flashing SES lights speedo uncalibrated, and found it had a awkward tune in it. But it only put down an embarrassing ~300hp/340tq and it dived off a cliff past 5k RPM
Thinking either the short block is very tired or the cam (if it has one) isn't installed correctly.
Copy/paste from the add I found it on.
Plans for the car include rebuilding the T56, thinking a Tick Stg2; some new exhaust past the headers, it is obnoxiously loud for 300hp; then find a low mile LS engine to tinker on and eventually swap into the car. Looking for 420+rwhp.6 speed
Moser 12 bolt rear end - 4 channel abs and tcs still work 3.91 gears
Hooker Long tubes Coated
GT-2 Cam - sleeper cam no real lope
Tsp ported oil pump
qa1 Coilovers
qa1 rear shocks
Ram twin disk clutch
17x9 17x11 zr1 rims - brand new Nitto 555r drag radial maybe 200 miles on them
Drilled and slotted rotors
30 lb injectors + walbro 255 fuel pump
Powermaster 200 amp alternatorLast edited by Matt0matic; 12-07-2011 at 12:07 AM.
-
12-06-2011 #2
- Join Date
- Apr 2010
- Location
- Fresno
- Posts
- 776
welcome nice ride. see it for sale.
-----------------------------------------------------------------------------------------------------------------------
Originally Posted by 02_ramair_ta
Originally Posted by 71 Heartbreaker
Originally Posted by Tony @ Cen-Cal Racing
-
12-06-2011 #3
Private Racer
- Join Date
- Dec 2009
- Posts
- 37
Thanks Originally Posted by KING Z28 HAWK
I'm thinking the GT2 cam is the Lingenfelter GT2-3 with 207/220 .571/.578 –118.5CL
-
12-06-2011 #4
- Join Date
- Jan 2011
- Posts
- 85
dang 300HP out of a cam car, hope you didnt pay to much, but it seems to have good value with all the other stuff.
my LS1+AOP=
-
12-07-2011 #5
- Join Date
- Apr 2010
- Location
- Fresno
- Posts
- 776
What's the plan for the new ride?
Tyler what's up man?-----------------------------------------------------------------------------------------------------------------------
Originally Posted by 02_ramair_ta
Originally Posted by 71 Heartbreaker
Originally Posted by Tony @ Cen-Cal Racing
-
12-07-2011 #6
EVIL Z
- Join Date
- May 2010
- Posts
- 1,390
Nice ride.. Where u from..
-
12-07-2011 #7
Private Racer
- Join Date
- Dec 2009
- Posts
- 37
Great town of Visalia. Originally Posted by 00ls1z
Plans for the car include rebuilding the T56, thinking a Tick Stg2; some new exhaust past the headers, it is obnoxiously loud for 300hp; then find a low mile LS engine to tinker on and eventually swap into the car. Looking for 420+rwhp. LS6 intake, 243 or 5.3 heads and a rebuilt or low mile stock shortblock. And maybe put a small shot on it just for shits and giggles. But that will be a ways down the road.What's the plan for the new ride?
-
12-07-2011 #8
- Join Date
- Jan 2011
- Posts
- 85
not much, debating to either go cam and heads on the camaro or save for a 6.0L GTO already modded Originally Posted by KING Z28 HAWK
my LS1+AOP=
-
12-07-2011 #9
Private Racer
- Join Date
- Jan 2010
- Posts
- 69
Nice car, I've seen it in person, pretty clean.
Did you do a compession or leakfown test? That's damn low for even a bolt on m6 car
-
12-07-2011 #10
EVIL Z
- Join Date
- May 2010
- Posts
- 1,390
Cool hope to see ya around or at a meet.. I'm in Tulare but wrk in Visalia
Reply With Quote
2002 CHEVROLET CAMARO Z-28
1999 CHEVROLET CAMARO Z-28
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
